SLT Sleeve-type double-flow compensator

SLTSleeve-type double-flow compensator Drawing on the advantages of the original sleeve compensator, the ability to compensate for increases, deformation resistance to minimize stress and fluid, its components from the core tube, packing chamber, special packing and cylinder assembly sealed into one.

Design condition:
Nominal pressure: PN0.25, 0.6, 1.0, 1.6, 2.5MPa
using temperature: ≤400^οC
1, Core tube (two ) 2, Sealed gland

Parameter

DN	L	L 1	L 2	H	N	M	Compensation ΔL	Foot bolt	Friction ≤ N
25	772	300	100	170	129	75	260	4-M12	850
32	772	300	100	173	136	82	260		1190
40	772	300	100	179	148	94	260	4-M16	1700
50	832	300	150	185	160	109	260		2000
65	912	300	150	194	177	126	300		2600
80	912	300	150	203	195	144	300		3500
100	970	430	150	217	224	169	300	4-M20	4800
125	970	430	150	230	25	195	300		5700
150	970	430	150	243	276	221	300		7400
200	970	460	300	275	340	285	300		8000
250	1280	460	350	307	404	345	400	6-M24	9750
300	1324	460	420	337	463	404	400		12150
350	1328	460	420	363	515	456	400		14800
400	1328	500	420	389	567	508	400		16900
450	1328	500	420	416	621	562	400	6-M27	20500
500	1328	610	500	441	671	612	400		23000
600	1424	610	500	488	785	735	440		27300
700	1424	700	600	509	877	827	440	6-M30	30000
800	1456	700	600	589	988	938	440		33000
900	1456	800	700	643	1096	1946	440		36006
1000	1456	800	700	744	1297	1247	440		40000